Low Acoustic Noise and Compact Range

m-series

Silent type appropriate for abnormal noise inspection
Compact and silent design, but also powerful for full-scale test.
m-series(Low Acoustic Noise and Compact Type)

Features

■Silent design employing a built-in cooling fan
DC powered cooling fan is built-into the shaker. Natural air cooling is also used when the cooling fan is stopped for silent operation. (with a reduction in performance)

Table Insert Pattern

Table Insert Pattern

Specifications

System Model m030/MA1-CE m060/MA1-CE m120/MA1-CE m030H/MA1 m130LS/MA1-CE
System
Specifications
Frequency Range(Hz) 0-3000 0-3000 0-2000 1000-10000 2-1000
Rated
Force
Sine(N) 300 600 1200 380 1300
Random(N rms) 210 420 840 266 650
Shock(N) 300 600 1200 380 1300
Maximum
Acc.
No load(m/s2) 500 500 500 200 130
0.5kg load(m/s2) 272 352 413 158 123
1.0kg load(m/s2) 187 272 352 131 118
Maximum Velocity (m/s) 1.6 1.6 1.6 - *1 1.0
Maximum Displacement
(mmp-p)
26 30 30 - *1 51.0
Maximum Load(kg) 15 15 120 15 100
Power Requirements(kVA) *2 0.4 0.7 1.1 0.5 1.1
Vibration
Generator
Model m030-CE m060-CE m120-CE m030H m130LS-CE
Armature Support Method Diaphragm spring Diaphragm spring Air Suspension Rubber spring Air Suspension
Armature Mass(kg) 0.6 1.2 2.4 1.9 10
Armature Diameter(φmm) 114 114 174 65 180
Dimensions(mm) φ190
×
H240
φ230
×
H281
φ320
×
H327*3
φ190
×
H275
W410
×
H592
×
D460
Mass(kg) 22 40 110 30 250
Power
Amplifier
Model MA1-CE MA1-CE MA1-CE MA1-CE MA1-CE
Maximum Output(kVA) 1.0 1.0 1.0 1.0 1.0
Dimensions(mm)WxHxD 430
×
149
×
430
430
×
149
×
430
430
×
149
×
430
430
×
149
×
430
430
×
149
×
430
Mass(kg) 25 25 25 25 25
Cooling Method Air cooling
Cooling Blower Housed in vibration generator
  • *1 The displacement at the lower limit of frequency (1000 Hz) and maximum acceleration (200 m/s2) is so small that there is no certified value.
  • *2 Power supply: single-phase 100 V or 200-240 V, 50/60 Hz. A transformer is required for other supply voltages.
  • *3 Insulation pad (W410 x H45 x D410 mm) is standard equipment.
  • * The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70 % must be applied. Continuous use at maximum levels may cause failure. Please contact IMV if you use more than 70 %.
  • * Frequency range values vary according to sensor and vibration controller.

2-axis changeover vibration test system

2-axis  changeover vibration test system

m-series multi-axis system

A range of small-size systems, including 2-axis and 3-axis simultaneous systems, employing the popular m-series vibration generators and patented Integrated Cross Coupling Bearing Unit (ICCU) multi-axis armature / load support technology.

  • Compact design
  • Low noise (ideal for squeak-rattle testing)
  • High precision measurement
  • Low power consumption
System specifications
Rated force 1200N
Table size 200×200mm
Maximum
frequency
500Hz
Maximum
acceleration
30m/s2
Maximum
displacement
10mmp-p
Maximum
payload
10kg
Cooling method Air cooling
System noise 55dB(A)
Weight Approx. 730kg
Power
requirements
3φ200V, 4kVA

to the top page

Outward Dimensions

m030-CE

m060-CE

m120-CE

m130LS-CE

Options

Head expander

Model Dimensions (mm) Mass(kg) Maximum Frequency (Hz) m030-CE m060-CE m120-CE
TBV-125-□-A 125×125×t20 0.9 2000  
TBV-200-□-A 200×200×t20 2.5 1500 *
TBV-315-□-A 315×315×t30 8.5 1000   *
*TBV-400-□-A 400×400×t35 14.4 600     *

Head expander

“-A” at the end of model number shows that material is aluminum alloy.
Add the vibration generator type where “□” is shown.

* The supplementary guidance system using linear bearings is used with the vibration generator when combined with the head expander.

Slip table

Model Dimensions (mm) Maximum Frequency (Hz) Mass (kg)
m030-CE m060-CE m120-CE
TBH-200 200×200 500 4 4 5.5
TBH-315 315×315 500 7.5 7.5 9
TBH-400 400×400 500 12.3 14

Slip table

to the top page