- HOME>
- Products>
- Electrodynamic Vibration Test Systems>
- i-series (Standard Range)
- Promotion movie
- Seismic Monitorig Systems
Standard Range
i-series
- Universally applicable with a sales success for over 15 years.
- The i-series is a standard range and easier to maintain than customer tailored products.
Features
- ■Test range:
-
・Maximum acceleration: 1250 m/s2
・Maximum velocity: 3.5 m/s
・Maximum displacement: 51 mmp-p
・Maximum loading mass: 200 kg - ■Patented upper (armature) support system PS Guide
- Parallel Slope Guide is standard
- ■All models can be directly coupled to a climatic chamber.
Table Insert Pattern (Unit:mm)
Specifications
| System Model | i210/SA1M | i220/SA1M |  i220/EM1M |
||
|---|---|---|---|---|---|
| System Specifications |
Frequency Range(Hz) | 0-4000 | 0-3300 | 0-3300 | |
| Rated Force |
Sine(kN) | 3 | 8 | 8 | |
| Random (kN rms)*1 | 3 | 8 | 8 | ||
| Shock(kN) | 9 | 16 | 16 | ||
| High Velocity Shock (kN)*5 | - | - | 10 | ||
| Maximum Acc. |
Sine(m/s2) | 1000 | 1250 | 1250 | |
| Random (m/s2 rms) | 700 | 875 | 875 | ||
| Shock (m/s2peak) | 2000 | 2000 | 2000 | ||
| High Velocity Shock (m/s2peak)*5 | - | - | 1562 | ||
| Maximum Vel. |
Sine(m/s) | 2.2 | 2.2 | 2.2 | |
| Shock (m/s peak) | 2.2 | 2.2 | 2.2 | ||
| High Velocity Shock (m/s peak)*5 | - | - | 3.5 | ||
| Maximum Dsp. |
Sine(mmp-p) | 30 | 51 | 51 | |
| High Velocity Shock (mmp-p)*5 | - | - | 51 | ||
| Maximum Travel(mmp-p) | 40 | 60 | 60 | ||
| Maximum Load(kg) | 120 | 200 | 200 | ||
| Power Requirements (kVA)*2 | 6.8 | 16.4 | 16.4 | ||
| Breaker Capacity (A)*3 | 30 | 60 | 60 | ||
| Vibration Generator |
Model | i210 | i220 | i220 | |
| Armature Mass(kg) | 3 | 6.4 | 6.4 | ||
| Armature Diameter (φmm) | 128 | 190 | 190 | ||
| Allowable Eccentric Moment(N･m) | 160 | 294 | 294 | ||
| Dimensions(mm) WxHxD | 868 × 700 × 458 | 1020 × 903 × 550 | 1020 × 903 × 550 | ||
| Shaker Body Diameter(mm) | 458 | 550 | 550 | ||
| Mass(kg) | 350 | 900 | 900 | ||
| Power Amplifier |
Model | SA1M-i10 | EM1M-i20 | EM1M-i20 | |
| Maximum Output(kVA) | 5 | 10 | 10 | ||
| Dimensions(mm) W×H×D | 580 × 1750 × 850 | 580 × 1750 × 850 | 580 × 1750 × 850 | ||
| Mass(kg) | 240 | 280 | 330 | ||
| Controller | Vibration Controller | See Vibration Controller K2 | |||
| Cooling | Cooling Method | Air cooling | |||
| Blower | Dimensions (mm)WxHxD*4 | 386 × 882 × 369 | 492 × 1128 × 625 | 492 × 1128 × 625 | |
| Mass(kg) | 22 | 70 | 70 | ||
| Wattage(kw) | 0.4 | 1.5 | 1.5 | ||
| Duct Hose Diameter(φ) | 125 | 125 | 125 | ||
- *1 Ranfom ｆorce ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.
- *2 Power supply: 3-phase 200/220/380/400/415 V, 50/60 Hz. A transformer is required for other supply voltages.
- *3 Breaker capacity for 200 V
- *4 Spec described above is in case of 60 Hz. Dimension is changed in case of 50 Hz.
- *5 In case of high velocity option
- * The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70 % must be applied. Continuous use at maximum levels may cause failure. Please contact IMV if you use more than 70 %.
- * In the case of Random vibration test, please set the test definition of the peak value of acceleration waveform to be operated less than the maximum acceleration of Shock.
- * Frequency range values vary according to sensor and vibration controller.
- * Armature mass and acceleration may change when chamber is comibined.
- * Mass and dimensions may change for CE-marked systems.
